Assembly Instructions

2 of 2

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in

outlet box, connect xture’s ground wire to the mounting plate (C) using the green screw (included).

d. Carefully place connections and LED driver (B) in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).

4. Install the back plate (E) to the mounting plate (C) using the nials (F).

5. Remove plastic lm on light guide disk (G).

6. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• Do not scratch light guide disk or light output will be aected.

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performance, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

INSTRUCTIONS D’INSTALLATION

LED Sconce, Double LED Sconce