Assembly Instruction

2 of 2
Assembly Instructions
Important
1. Shut off power to the outlet box (A).
2. Make appropriate electrical connections using wire nuts:
a. Connect the transformer's (B) live wire (black) to the live outlet box wire.
b. Connect the transformer’s (B) neutral wire (white) to the neutral outlet box wire.
 c.Connectthexture’sgroundwire(greenoruncoated)tothegroundoutletboxwire.Ifnogroundispresentin
 outletbox,connectxture’sgroundwiretothemountingplate(C)usingthegreenscrew(included).
 d.Carefullyplaceconnectionsinoutletbox(A).
3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).
For Wet Location use:Fixturemustbeinstalledintheorientationshown.
4.Installthexture(E)tothemountingplate(C)byhookingthebracketinthextureontotheupperbends(F)onthe
mountingplate.Securewithmountingsetscrews(G)usingincludedAllenwrench(H).
5. For Wet Location use: Placeasmallbeadofsiliconeorwaterproofcaulk(notincluded)aroundthexture(E)whereit
comes into contact with the wall.
6.Restorepowertothexture.
Note
• The outlet box must be at least 2" x 4" and 1.5" deep to t the transformer.
• This xture is non-dimming.
Care Instructions
• Dusting: Use a clean, dry cloth.
• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.
A
B
C
G
H
D
F
E
INSTRUCTIONS D’INSTALLATION
LED Sconce
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.