Owner Manual

15. Light Kit LED Driver Replacement (Continued)
15.11
Reconnect the motor AC power connector to the Light
Kit LED Driver connector (Figure 50).
Reconnect the motor DC power connector to the Light
Kit LED Driver connector (Figure 50).
15.12
Replace the upper motor cover by reassembling the
three screws previously removed in Step 15. 7.
Placement of the screws should be every other hole as
shown in Figure 5 1.
15.13
Re-seat the downrod in the motor couple r.
Rotate and align the two downrod holes with the two
holes in the motor coupler as shown in Figure 52 .
15.14
Reassemble the downrod to the motor coupler by following
the Ceiling Fan Assembly, Sections 3, Steps 3.9 through
3. 10 .
15.15
Rehang your ceiling fan per Section 4, Step 4.2.
15.16
Rewire your ceiling fan pe r Section 7, Steps 7.1 through
7.6
15.17
Restore electricity and verify function of the Light Kit.
31
MOTOR DC POWER
CONNECTOR
Figur e 50
Fi g ur e 51
4. 5"
DOWNROD
LI GHT KIT LED DRIVER
DC POWER CONNECTOR
~ UP PER MOTO R
COVE R SCREWS (3)
U PP ER
MO T OR
COVE R
ALIGN DOWN ROD
HOLE WI TH MO T OR
COUPLER HOLE