Owner Manual

7. How to Wire Your Ceiling Fan (Continued)
7.5
Screw the two threaded studs (supplied) into the
tapped hol es in the hanger bracket (Figure 29).
7.6
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the ho l es in the ceiling
cover (Figure 30).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (F igure 30).
Tighten the knurled knobs securely until the cei li ng
cover fi ts snugly against the ceiling and the ho le in the
ceiling cover is clear of the downrod.
.A WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
17
THREADED
STUDS (2)
Figure 29
Figure 30
CEILING
COVER
THREADED
STUDS (2)
LO C KWASHERS (2)
KNURLED
KNOBS (2)