Owner Manual

5. Light Kit Assembly
Skip to Section 6.0 if not inst alling the
supplied light kit.
5.1
Remove one of the three screws in the Light Kit Adapter
and loosen the remaining two screws (Figure 17).
Retain the screw for future use.
5.2
Engage the fan motor 2-pin wire connector into the 2-
pin wire connector of the Light Kit Assembly (Figure 18).
The connection is complete when you hear a soft cl ick .
5.3
Carefully tuck all the wires and connectors into the Light
Kit Assembly.
Position the Light Kit Assembly key ho le slots onto the
two loosened screw heads . Rotate the Light Kit
Assembly clockwise to engage the two screw heads
(Figure 19). Verify that the wires and connectors are not
trapped between the Light Kit Assembly and the Light
Kit Adapte r.
Reinstall the previously removed screw.
Retighten all three screws to securely attach the Light
Kit Assembly to the Light Kit Adapter.
A spare Light Kit Adapter #6-32 x .375" pan head sc r ew
is in the parts bag, if needed.
12
REMOVE LIGH T
KIT ADAP TER PA
HEAD SCREW
Fi g ure 17
FAN MOTOR ASSEMBLY
2-P IN CONNECTOR
LIGHT KIT ASSEMBLY
2- PIN CONNECTOR
Figure 18
LIGHT KIT
1111!111. ....,, ADAPTER
1
............. .,. LIGHT KIT
~O TATE CLOCKWISE ASSEMBLY
REINSTALL LIGHT KIT
Fi g ure 19
ADAPTER PAN HEAD SCREW
~ WARNING
To avoid pos s ible fire or shock , do not pinch w ires
b et ween the Ligh t Kit Assembly a nd t he Ligh t Kit
Adapter.