Installation & Assembly

PLEASE READ AND SAVE FOR FUTURE REFERENCE.
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If
you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations
provided.
Do NOT tamper with or attempt to repair LED component of fixture.
1. OUTLET BOX (not included)
2. MOUNTING PLATE (pre-attached)
3. OUTLET BOX SCREWS and
WASHERS (pre-attached to outlet box)
4. BLACK SUPPLY WIRE (not included)
5. SMOOTH (or BLACK) FIXTURE
LEAD WIRE
6. WHITE SUPPLY WIRE (not included)
7. RIBBED (or WHITE) FIXTURE LEAD
WIRE
8. SUPPLY GROUND WIRE (not included)
9. FIXTURE GROUND WIRE
10. WIRE CONNECTORS
11. GROUND SCREW (pre-attached)
12. FIXTURE SCREWS
13. LED FIXTURE
WARNING: To prevent moisture from entering the outlet box and causing a shock,
After Completing installation use clear caulking to outline the outside of the fixture's
backplate where it meets the wall, leaving a space at the bottom to allow moisture
Caulking
Backplate
Caulk
12
12
3
11
13
2
1
10
8
9
4
5
6
7
12
12
a means of escape.
(Series Included 10W LED/Series Included 14W LED/Series Included 18W LED)
Outdoor Pocket Sconce
LIGHTING

Summary of content (2 pages)