Installation & Assembly

PLEASE READ AND SAVE FOR FUTURE REFERENCE.
GENERAL 
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations 
provided.
Do NOT tamper with or attempt to repair LED component of fixture.
 1. OUTLET BOX (not included)
 2. MOUNTING PLATE (pre-attached)
 3. OUTLET BOX SCREWS and
 WASHERS (pre-attached to outlet box)
 4. BLACK SUPPLY WIRE (not included)
 5. SMOOTH (or BLACK) FIXTURE
 LEAD WIRE
 6. WHITE SUPPLY WIRE (not included)
 7. RIBBED (or WHITE) FIXTURE LEAD
 WIRE
 8. SUPPLY GROUND WIRE (not included)
 9. FIXTURE GROUND WIRE
10. WIRE CONNECTORS
11. GROUND SCREW (pre-attached)
12. FIXTURE SCREWS 
13. LED FIXTURE
   WARNING: To prevent moisture from entering the outlet box and causing a shock, 
After Completing installation use clear caulking to outline the outside of the fixture's 
backplate where it meets the wall, leaving a space at the bottom to allow moisture 
Caulking
Backplate
Caulk
3
11
12
13
2
1
10
8
9
4
5
6
7
12
a means of escape.
(Series Included 10W LED/Series Included 14W LED/Series Included 18W LED)
Outdoor Pocket Sconce
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If 
 you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
LIGHTING


