Installation & Assembly

Step 5
Place the velcro non-woven fabric cover back underneath the
chair seat from where it was removed from originally.
Place the chair on a LEVEL SURFACE to see if it is wobbling.
If it is, hold the chair with your two hands and hang it at 30cm to
50cm height from the ground.
Drop it freely and vertically with the four legs falling on the
ground at the same time. Test again to see if the chair is
wobbling on the LEVEL SURFACE. Now tighten all the bolts
untill the chair is not wobbling on the LEVEL SURFACE.
WARNING IF CHAIR IS NOT STABLE ,IT COULD LEAD TO
DAMAGING THE PRODUCT.
Page 6 OF 6