Installation & Assembly

Figure 3
Attach Cross Bar (4) to
pre-assembled unit from
Figure 2 with Bolts (B) .
Tighten Bolts (B) with Allen
Wrench (G).
Attach Brackets (H) to the
Desktop (1) with Screws (C).
Tighten screw with Phillips
screwdriver (not included).
Figure 4
Mark two desired locations on
the wall and drill two 3/16"
holes.
Insert plastic Anchors (D) into
the holes on wall, tap lightly
with a hammer (not included)
as needed.
Page 4