Adjustable Height Desk Assembly Instructions Please do not load more than 30 lb. when desktop is fully raised.
Adjustable Height Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. A. Quantity of 8 Bolt 1/4”x1-1/4”L D.
Adjustable Height Desk Assembly Instructions Attach Adjustable Levels (F) to Side Legs (2/3) by hand. Figure 1 Attach Legs (2/3) to Desktop (1) with Bolts (A). Tighten Bolts (A) with Allen Wrench (G).
Attach Cross Bar (4) to pre-assembled unit from Figure 2 with Bolts (B) . Tighten Bolts (B) with Allen Wrench (G). Attach Brackets (H) to the Desktop (1) with Screws (C). Tighten screw with Phillips screwdriver (not included). Figure 3 Mark two desired locations on the wall and drill two 3/16" holes. Insert plastic Anchors (D) into the holes on wall, tap lightly with a hammer (not included) as needed.
Attach the Brackets (H) to the wall using Screws (E). Tighten Screws (E) using Philips screwdriver (not included). Figure 5 Move this item close to the wall and tie brackets (H) together with Plastic Straps (I). Note: Anti-tipping hardware must be used for this product to avoid tipping and injury.
Now your Adjustable Height Desk is ready to use! To open top, simply pull up. Guide back down to close. The top can be adjusted to four different heights. Figure 7 If the Desk is not level, adjust the adjustable foot pad by hand.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed
