Page 1 of 12
Cam Lock Fastener Assembly Board A Cam Locks are fasteners used to join two boards together, usually the edge of one board (A) to the flat side of another board (B). flat side edge to join Board B Cam Lock Cam Pin To use Cam Lock Fasteners: Step 2 - Fit the hole in the edge of the joining board over the Cam Pin. The head of the Cam Pin will be visible in the large hole in the side of the joining board, as in Step 3. Step 1 - Insert Cam Pin into the flat side of a board. Tighten only until snug.
Page 3 of 12
Page 4 of 12
Insert dowel (#C) to the hole of the divider panel (#4). Align the divider panel (#4) to the holes of the shelf frame (#2). Secure by using screws (#H).
Attach dowels (#C) and cam bolts (#A) to the holes of the side panels (#6), then align side panels (#6) to the holes of the shelf frame (#2). Secure by using cam locks (#B) onto cam bolts (#A). Attach cam bolts (#A) and dowel (#C) onto shelf frame (#2). Align bottom panel (#5) to the shelf frame (#2), then secure by using cam locks (#B).
Attach dowel (#C) to the hole of the bottom panel (#5). Align large bottom panel (#3) to the bottom panel (#5), then secure by using screws (#H). Attach cam bolts (#A) and dowels (#C) to the holes of the legs (#7,8). Align legs (#7,8) to the holes of the product, then secure by using cam locks (#B).
to the holes of the product. Secure by using cam locks (#B). Flip the product 180 degrees. Slightly hammer in floor protectors (#L) to the bottom of each legs. Align and attach the support leg (#13) to the holes of the bottom panel (#3) by using screws (#G).
Attach cam bolts (#A) to the holes of the top panel (#1). Attach dowels (#C) to the holes of the top panel (#1). Align top panel (#1) to the holes of the base. Secure by using cam locks (#K), then use stickers (#B) to cover cam locks (#K).
Align handle (#I) to the front hole of the front drawer panel (#9). Secure by using bolts and washers (#J). Attach cam bolts (#D) to the holes of the front drawer panel (#9). Align front drawer panel (#9) to the holes of the side drawer panels (#10). Secure by using cam locks (#E).
Slide the bottom panel (#11) through the thin lined gaps of the drawer. Insert dowels (#F) to the holes of the drawer bottom support (#12). Attach drawer bottom support (#12) to the holes of the drawer back panel.
Attach cam bolts (#D) and dowels (#F) to the holes of the front drawer panels (#9). Align front drawer panel (#9) to the holes of the drawer, then secure by using cam locks (#E).
