User manual

GETTING TO KNOW FOOD PROCESSOR
3
1. Blade Storage Cover
2. Blade Storage
3. Blade Access Button
4. On/Off Speed Control
5. Pulse/Turbo Button
6. Main Unit
7. Spindle
8. Processor Bowl
9. Processor Lid
10. Food Pusher
11. Main Chopping Blade
12. Double Chopping Blade
13. Chopping Blade Cover
14. Dough Blade
15. Thin Shredding Blade
16. Thick Shredding Blade
17. Thin Slicing Blade
18. Thick Slicing Blade
19. Blade Holder
20. Spatula
Technical Specifications
Voltage: 120V., 60Hz.
Power: 600 Watts
Capacity: 6 Cups (1.5 Liters)
IMPORTANT: Remove protective blade cover(s) before use. Protective
blade covers to be used ONLY for storage.
4
OPERATING INSTRUCTIONS
Speed Control Dial
The food processor speed control dial
has two speeds settings plus "Pulse" and
"Turbo".
1 - Low
2 - High
The speed can be adjusted while the
food processor is in use.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse" when
the unit is in the "Off" position. Use
"Turbo" when the unit is in the "On"
position and you need a burst of power.
Please note that the "Pulse" and "Turbo"
is only intended to be used for short
"bursts" of processing.
Operating the Food Processor
Setting up:
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 1)
3. When fitted correctly, the handle will
fit into the slot at the base of the unit.
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 4)
Main Blade
Double
Blade
4. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP.
ALWAYS REMOVE PROTECTIVE
BLADE COVERS BEFORE USING.
The double chopping
blade may be
used with one
blade or with
two blades.
1. To use as
a double
blade, carefully
slip the separate
blade over the
shaft of the
main blade.
(Fig. 2 & Fig. 3)
Two Blades
Together