Mixer User Manual

11
POSITIONING DRAWBAR
IMPORTANT: Drive components can be damaged
from excessive speed. Under no
circumstances should a feed mixer
equipped with 540 RPM be operated
by a tractor with 1000 RPM PTO.
Feed mixers are available with either 540 or 1000
RPM driveline. Match tractor PTO with the feed
mixer driveline.
IMPORTANT: To prevent driveline damage, adjust
tractor drawbar to recommended
setting. Disengage tractor PTO before
turning.
Remove clevis if equipped. Turn offset drawbar
down.
Adjust drawbar length:
PTO SPEED DIMENSION (A)
540 RPM 14 inches (356 mm)
1000 RPM 16 inches (406 mm)
ADJUST TRAILER HITCH CLEVIS
Mixer should be approximately level when attached
to tractor.
Adjust clevis by changing hole location on tongue.
Hitch Pin Size --- 1” x 7”
SAFETY
READ BEFORE
YOU FEED
PREPARING TRACTOR FOR TRAILER MIXER