Product Manual

Using Hydraulic Motor Implement (Continued)

4. Stopping or Removing Attached Implement with Hydraulic Motor:

• To turn off the engine, verify the valve handle is in the center (neutral) position which should cause the

hydraulic motor to come to a complete stop.

• Turn the engine off using on/off switch located on engine.

• Confirm the hydraulic motor has come to a complete stop.

• Operate any switches or valves in the system to relieve pressure.

• Move the Hydraulic Power Pack valve handle to the forward position for four (4) to five (5) seconds,

then to the reverse position for four (4) to five (5) seconds to relieve pressure.

• Operate any other valves or switches on accessory items to relieve pressure.

• If hoses are connected with quick disconnects, disconnect the hoses.