Product Manual

4
Installation Instructions
Step 2
• Lubricate O-rings and threads on elbow fittings with clean oil.
• Looking at fittings from end with nut/washer/O-ring assembly, turn nut clockwise as
far as possible.
• Using wrench, turn elbow fittings into the IN and OUT ports of the valve. Continue
turning until washer touches thread nearest wrench pad.
• Back off fittings counterclockwise not exceeding one revolution until they are
oriented as shown.
• Place wrench on the wrench pad of fitting to prevent fitting from turning and torque
nut to 70-87 ft-lbs after valve is mounted to unit.
Tools Needed
• Adjustable Wrenches
• 1-1/4 Crowfoot Wrench
• Torque Wrench
OUT port
IN port
Elbow fittings