Product Manual

5
Installation Instructions
Step 3
• Place dust cap and dust plug loop over hose.
• CAUTION: Never back off an installed pipe fitting to achieve proper alignment.
Loosening installed pipe fittings will corrupt the seal and contribute to leakage and
failure.
• Screw hand-tight hose fittings with thread sealant applied into the quick disconnect
fittings (male with cap and female with plug).
• Wrench-tighten the fitting to 1.5-3.0 Turns Past Finger Tight position. Properly
assembled fittings total thread engagement should be 3.5-6 turns.
Tools Needed
• Adjustable Wrenches
Male quick disconnect fitting
Hose
Dust plug
Dust cap
Female quick disconnect fitting