Product Manual
Table Of Contents
- NOTICE TO OPERATORS
- CAUTION
- OPERATOR INSTRUCTIONAL DATA SHEET
- 1 INTRODUCTION
- 2 INTENDED USE
- 3 TRAINING
- 4 SAFETY SYMBOLS
- 5 SAFETY INSTRUCTIONS
- Clothing
- Flying Debris
- Burns
- BACK CARE & PROPER LIFTING PROCEDURES
- Back Anatomy
- Back Care Preventative Measures
- PROPER LIFTING PROCEDURES
- TRANSPORTATION
- DETERMINATION OF POTENTIAL SUBSURFACE HAZARDS IN PROPOSED DIGGING LOCATION(S)
- DETERMINATION OF POTENTIAL ABOVE SURFACE HAZARDS IN PROPOSED DIGGING LOCATION(S)
- OPERATIONAL HAZARDS UNDERSTANDING KICKBACK
- MINIMIZING KICKBACK FROM A DESIGN STANDPOINT
- 6 MACHINE SPECIFICATIONS
- 7 STANDARD PRODUCT & ACCESSORIES
- 8 MACHINE SET-UP
- 9 APPLICATION THEORY & TECHNIQUES
- 10 OPERATING INSTRUCTIONS
- 11 MAINTENANCE INSTRUCTIONS
- 12 SERVICE/REPAIR INSTRUCTIONS
- 13 TROUBLESHOOTING
- NOTE: If troubleshooting information does not correct situation, all maintenance/repairs not described in this operator manual must be done by a dedicated service center following a specific service/repair manual.
- ENGINE WILL NOT START
- ENGINE LOSES POWER
- ENGINE OVERHEATS
- AUGER LACKS POWER
- AUGER BIT ROTATES AT IDLE SPEED
- TEMPORARY STORAGE (On Job Site)
- LONG TERM STORAGE
- 15 END OF LIFECYCLE
100 SERIES ONE-MAN AUGER
FORM GOM08042002US, VERSION 1.0
English-EN 2
OPERATOR INSTRUCTIONAL DATA SHEET
The following undersigned operators of Auger described and/or pertaining to this Operator Manual have received formal safety and operational
information/instruction from undersigned owner(s)/instructor(s) in accordance to OSHA 29 CFR 1926.21 (b)(2) and/or applicable updated revisions pertaining to,
but not necessarily limited to the:
1. READING, COMPREHENSION AND ACKNOWLEDGEMENT OF MATERIAL COMPRISING ENTIRE CONTENTS OF APPLICABLE OPERATOR
MANUAL.
2. FORMALIZED OPERATOR SAFETY PROGRAM TO BE DEVISED BY OWNER OF AUGER IN CONJUNCTION WITH CONTENTS OF APPLICABLE
OPERATOR MANUAL FOR AUGER.
3. OSHA RULES AND REGULATIONS RESEARCHED FOR AND/OR BY OWNER OF AUGER AND DEEMED APPLICABLE TO SAFE AND PROPER
USE AND/OR OPERATION OF AUGER FOR ANY SPECIFIC JOB APPLICATION.
4. LOCAL LAWS, REGULATIONS AND CUSTOMS RESEARCHED FOR AND/OR BY OWNER OF AUGER AND DEEMED APPLICABLE TO SAFE AND
PROPER USE AND/OR OPERATION OF AUGER FOR ANY SPECIFIC JOB APPLICATION.
5. FORMALIZED MAINTENANCE PROGRAM FOR AUGER TO BE DEVISED BY OWNER OF AUGER IN ACCORDANCE WITH, BUT NOT
NECESSARILY LIMITED TO, SPECIFICATIONS, GUIDELINES AND OPERATIONAL INFORMATION CONTAINED IN APPLICABLE OPERATOR
MANUAL.
6. COMPREHENSIVE OPERATIONAL INSTRUCTIONS FOR CORRECT AND PROPER USE OF AUGER AS PER CONTENTS OF APPLICABLE
OPERATOR MANUAL.
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
_________________________________ Operator ______________________________ Owner/Instructor __________ Date
NOTE: INSERT COPIES OF THIS PAGE WITHIN OPERATOR’S MANUAL IF SPACE FOR ADDITIONAL OPERATORS IS REQUIRED.