Blender User Manual

5
The Multiquick Baby Set is perfectly suited
for preparing baby food and mixing pow-
dered formula as well as preparing grown
up meals.The handblender not only comes
with a chopper and two powdered milk
stirrers, but also with additional baby
accessories.
Caution
Please read the use instructions care-
fully and completely before using the
appliance.
• Before plugging into a socket, check that
your voltage corresponds with the
voltage printed on the bottom of the
appliance.
• This appliance is designed for normal
household use only.
• This appliance must be kept out of reach
of children.
• This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
attempt to defeat this safety feature.
• Blades are very sharp.
• Always unplug the appliance before
assembling, disassembling and cleaning.
• Do not hold the motor part or the
coupling under running water,
nor immerse them in water.
• The beaker is not microwave-safe.
• The baby bottle, nipple and powdered
milk stirrers must be sterilized prior to
first use. Do not sterilize in the micro
wave. The bottle is not dishwasher-safe.
Do not leave child unsupervised while
feeding.
• The baby bottle and the bottle brush
with integrated nipple cleaner are not
covered by the Braun guarantee, nor are
they available at Braun Service Centers.
• Braun electric appliances meet
applicable safety standards. Repair or
replacement of the mains cord must
only be done by authorized service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
Description
Motor part
On/off switch
Shaft with blade
Powdered milk stirrer
Coupling
Stirrer insert (2 pcs.)
Chopper
Beaker
Funnel
Wall mount
How to operate your
handblender
1. Insert the motor part into the shaft
with blade and turn until it locks into
place.
2. To avoid splashing, insert the hand-
blender into a container first, then press
switch .
How to operate your powdered
milk stirrer
Only use the stirrer for mixing powdered for-
mula in baby bottles.
Connect the stirrer insert with the coupling
so it locks into place.
Then insert the motor part into the coupling
and turn until it locks into place.
After having filled powdered formula and
water into the bottle, insert the powdered
milk stirrer and press the switch to stir.
Cleaning
After use, remove the shaft with blade
or the powdered milk stirrer . Clean the
motor part and the coupling with
a damp cloth only. The shaft with blade ,
the stirrer inserts and the funnel
can be cleaned in the dishwasher.
The stirrer inserts have to be sterilized prior
to each use.
How to use your chopper
attachment
The chopper is perfectly suited for chop-
ping onions, herbs, garlic, carrots, walnuts,
hazelnuts, almonds, chilis (with water), baby
food etc.
Note:
Do not chop ice cubes or extremely hard
food, such as nutmeg, coffee beans, choco-
late and grains.
1. Carefully remove the plastic cover from
the blade.
2. Caution: The blade is very sharp!
Always hold it by the upper plastic part.
Place the blade on the center pin of the
chopper bowl, press it down and turn
it 90° until it locks. Always place the
chopper bowl on the anti-slip base/
cover.
3. Place the food in the chopper bowl.
4. Put the lid on the chopper bowl.
5. Put the motor part on the lid and turn
until it locks into place.
6. Press on/off switch to operate the
chopper. After each use, allow the
chopper to rest for approx. 5 minutes.
7. First remove the motor part, then the
lid.
8. Carefully remove the blade. (You may
have to turn the blade slightly.)
9. Then remove the processed food from
the chopper bowl.
10.Cleaning: Wipe the motor part with a
damp cloth. All other chopper parts are
dishwasher-safe.
Subject to change without notice.
A
B
C
D
1
2
E
F
G
H
A
C
B
B
C
D
A
D
1
C
D
2
G
hc
hc
a Lid
b Blade
c Chopper bowl
d Anti-slip base
4179459_MR440_BabySet_NA Seite 5 Montag, 26. Januar 2004 10:16 10