Product Description

ManualsBrandsBRAUN Manualsalarm clocksWeather Station LCD Alarm Clock with Outdoor Sensor

English

Battery precautions

1. Do not use rechargeable batteries.

2. Use only alkaline AA/AAA batteries of the same or equivalent type.

3. Insert batteries with the correct polarity.

4. Keep batteries away from children.

5. Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.

6. Avoid short circuiting the contacts in the battery compartment and battery terminals.

7. Remove batteries from the unit if it will not be used for long period of time.

8. Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause

damage to the clock.

Getting started

1. Remove the battery door.

2. Insert 2xAA size new batteries as indicated in the main unit and 2xAAA new batteries in the sensor as indicated in battery compartments.

3. To pair the main unit with the sensor, press the RESET key at the back of the main unit first, and then press the RESET key inside the battery

compartment of the sensor.

4. In some cases the main unit and the sensor will not pair immediately. You can reset the unit and the sensor again as described in the above

section. Due to the atmospheric disturbance, the best reception often occurs during night time.

5. Close the battery door.

Function keys

TIME SETTING / NEUTRAL / ALARM SETTING switch

- Slide the switch to the TIME SETTING position () to set the clock time.

- Slide the switch to the ALARM SETTING position () to set the alarm time.

- Slide the switch to the NEUTRAL position to exit the setting mode and return to normal display.

+ Key

- When the setting switch is in the NEUTRAL position, press the + key to change between 12 and 24 hour display format.

- In TIME SETTING or ALARM SETTING mode press to increase the setting value. Press and hold to speed up the setting.

- Key

- When the setting switch is in the NEUTRAL position, press the - key to change the temperature display between °C and °F format.

- In TIME SETTING or ALARM SETTING mode press to decrease the setting value. Press and hold to speed up the setting.

ALARM ON / OFF slider

- Shift the ALARM ON / OFF slider up to enable the alarm and the alarm time shows on LCD display 3 seconds.

- Shift the ALARM ON / OFF slider down to disable the alarm.

SNOOZE / LIGHT touch button

- Tap to turn on the backlight for 10 seconds.

- Tap to stop the alarm and activate the 5 minute snooze function.

RESET key

- Press by using a pin to reset all values to default. In case of a malfunction, the unit has to be reset.

PAIR button

- Press PAIR button to receive 433 MHz signal for outdoor sensor reception.

BACKLIGHT ON /OFF switch

- Slide the switch to ON position to enable the night light mode.

- Slide the switch to OFF position to disable the night light mode.

Product description (Image 1)

1. LCD display

2. SNOOZE / LIGHT touch button

3. ALARM ON / OFF slider

4. TIME SETTING / NEUTRAL / ALARM SETTING switch

5. + Key

6. - Key

7. Battery compartment

8. RESET key

9. PAIR button

10. BACKLIGHT ON / OFF switch

Display details (Image 2)

A. Time

B. AM / PM indicator (for 12 hour format)

C. Alarm icon

D. Indoor temperature

E. Outdoor temperature

F. Indoor humidity

G. Outdoor humidity

Summary of content (3 pages)

PAGE 1
English Battery precautions 1. Do not use rechargeable batteries. 2. Use only alkaline AA/AAA batteries of the same or equivalent type. 3. Insert batteries with the correct polarity. 4. Keep batteries away from children. 5. Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish. 6. Avoid short circuiting the contacts in the battery compartment and battery terminals. 7.
PAGE 2
H. Low battery indicator I. Weather forecast indicator Setting the time 1. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the TIME SETTING position (). 2. Press the ‘+’ or ‘-’ key to set the desired value. Press and hold the ‘+’ or ‘-’ key to speed up the setting. 3. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to the NEUTRAL position to return the normal display and save the settings. Setting the alarm 1.
PAGE 3
Should you have a problem with your product, please check your local service centre at: www.braun-clocks.com www.braun-watches.com or contact +44 208 208 1833 WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling. This product conforms to the EMC requirements as per council directive 2014/30/EU. This device complies with Part 15 of the FCC rules.