User Manual and Operating Guide

10
Do not expose the shaver to temperatures higher
than 50 °C for extended periods of time.
• Using the special cord set
w, connect the
shaver to an electrical outlet with the motor
switched off and charge it for at least one hour.
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
• If the rechargeable battery has run out of
power (discharged), you may also shave by
connecting the shaver to an electrical outlet via
the special cord set.
Shaver display 9
The green indicator fl ashes when the shaver is
being charged or when in use.
When the battery is fully charged, the charge
segment « » (720) / « » « » (730) will light
up continuously provided that the shaver is
switched on or connected to an electrical outlet.
Some minutes after completing the charging,
the shaver switches to the stand-by-mode:
The display turns off.
The red « » indicator fl ashes when the battery
capacity has dropped below 20%, provided the
shaver is switched on. The remaining capacity
will then be suffi cient for 2 to 3 shaves.
Personalizing your shaver
Personalizing your shaver
With the (–)
6
and (+)
7
buttons you can choose
the best setting for shaving different areas of
your face and as per your specifi c needs. The
different settings are indicated by the pilot light
incorporated in the on/off switch
5
:
• dark blue (powerful shave)
• light blue (normal)
• white (for a thorough comfortable shave in
sensitive areas of your face such as neck)
For a thorough and fast shave we recommend
the (+) setting.
When switching on next time, the last used
setting will be activated.
730 720
730 720
+
normal
96279902_730-720s4_Korea.indd 1096279902_730-720s4_Korea.indd 10 27.05.13 15:1927.05.13 15:19