Series 7 trimmer Series 7 Type 5694 Type 5695 www.braun.com 96279902_730-720s4_Korea.indd 15 730s-4 720s-4 27.05.
Leporello, 110 x 200 mm, 14 pages, 2/2c = HKS43N + black 1 Series 7 2 3 trimmer trimmer 4 on 10 off 5 6 7 8 9 12 11 trim mer Ser ies 7 2 96279902_730-720s4_Korea.indd 2 27.05.
STOP 3 96279902_730-720s4_Korea.indd 3 27.05.
730 720 730 720 + normal 4 96279902_730-720s4_Korea.indd 4 27.05.
lo ck tr + 2 trimmer lock k loc 1 lock release 90° r me trim Series Series er rlee ase Series 7 rlee ase trimmer Series 7 release 5 96279902_730-720s4_Korea.indd 5 27.05.
Series 7 release Series 7 release release Series 7 70S release 6 96279902_730-720s4_Korea.indd 6 27.05.
96279902_730-720s4_Korea.indd 7 27.05.
96279902_730-720s4_Korea.indd 8 27.05.
English Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun Shaver. Read these instructions completely, it contains safety information. Keep it for future reference. Warnings The shaver head is suitable for cleaning under running tap water. Detach the shaver from the power supply before cleaning the shaver head in water.
Do not expose the shaver to temperatures higher than 50 °C for extended periods of time. • Using the special cord set w, connect the shaver to an electrical outlet with the motor switched off and charge it for at least one hour. • A full charge provides up to 50 minutes of cordless shaving time. This may vary according to your beard growth. • If the rechargeable battery has run out of power (discharged), you may also shave by connecting the shaver to an electrical outlet via the special cord set.
tr How to use Press the on/off switch 5 to operate the shaver: lo ck • The pivoting shaver head and floating foils automatically adjust to every contour of your face. + 2 • To shave hard to reach areas (e.g. under the nose) slide the shaver head lock switch 3 to the back position to lock the pivoting head at an angle. lock k loc 1 trimmer • To trim sideburns, moustache or beard, slide the pop-out long hair trimmer 4 upwards.
Alternatively, you may clean the shaver with a brush: Series 7 • Switch off the shaver. Remove the Foil & Cutter cassette 1 and tap it out on a flat surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the foil and cutter cassette with the brush as this may damage it.
Trouble-Shooting Problem: Possible reason: Remedy: 1. Shaver head is cleaned with water. 2. Cleaning cartridge is in use for more than 8 weeks. 1. When cleaning the shaver head with water only use hot water and from time to time some liquid soap (without abrasive substances). Remove Foil & Cutter cassette to let it dry. 2. Change cleaning cartridge at least every 8 weeks. SHAVER Unpleasant smell from the shaver head. Battery performance dropped significantly. 1.
