User manual

also happen short term when charging after the battery was completely

discharged.

• A full charge provides 30 minutes of cordless shaving time depending on

your beard growth.

• Once the shaver is completely charged, discharge the shaver through

normal use. Then recharge to full capacity. Subsequent charges will take

about 1 hour.

• Maximum battery capacity will only be reached after several charging/

discharging cycles.

• 5-minute quick charge is sufficient for a shave.

Shaving

First, remove the protective cap (1). Activate the on/off switch (6). The floating

foil frame automatically adapts to your skin surface for a close, smooth shave.

For best results:

• Always shave before washing your face.

• At all times, hold the shaver at right angles (90°) to the skin (b).

• Stretch the skin and shave against the direction of beard growth.

• For pre-shaving after a few days of not having shaved, use the wide

trimmer (4a) to pre-cut long hairs. For a close, smooth shave, finish with

the foil.

• To maintain 100% shaving performance, replace your foil and cutter block

at least every 18 months or when worn.

Style

Using the twistable trimmer

The wide trimmer (4a) evenly cuts and trims large areas (c). It is ideal for

shaping sideburns, moustaches and partial short beards. The wide trimmer

is provided with safety rips and a gliding strip for less irritation and easy

gliding. Press the blue stripes to push up the twistable trimmer (4). While

stretching the skin, guide the wide trimmer against the direction of hair

growth.

The narrow trimmer (4b) precisely defines lines and edges (d), being ideal for

precise contouring.

To use the narrow trimmer, push up the twistable trimmer and turn it 180°.

Frequent use of the twistable trimmer will reduce the battery capacity.

Cleaning

The shaver head is suitable for cleaning under running tap water.

Warning: Detach the shaver from the power supply before cleaning

the shaver head in water.

99688368_cruZer4_face_MN.indd 1199688368_cruZer4_face_MN.indd 11 27.09.10 15:1827.09.10 15:18