Specifications

Introduction Chapter 1-3
Note
Without the software security key, the program will run as a
Demo version and will place a demo message on all labels
printed with the software.
Single User Installation
1 Attach the software security key as directed in the Soft-
ware Security Key section on page 1-2.
2 Insert the CD.
The CD’s opening screen will appear. (If the CD does not
automatically open, on the taskbar, click the Start button,
and then click Run. Type the letter of the CD-ROM drive
followed by CDSetup.exe (e.g., D:\CDSetup.exe).
3 On the opening screen of the CD, select the product to
install and then click the Run/Install button.
4 Follow the instructions displayed on the screen to select
and install the software.
Network Installation
Follow the guidelines below when installing a multi-user/
network version of the label design software:
• The label design software must be installed on a server
along with the License Manager application. Any worksta-
tion that will run the label design software must also have
the software installed locally.
• The security key must be attached to the server. Only one
security key is included with a network version of the soft-
ware, pre-programmed with the number of licenses pur-
chased.
• The software directory must be shared and mapped allow-
ing full read/write access to all potential users. This is nec-
essary for the network License Manager.
Note
The License Manager application is not compatible with Novell
systems, so Novell network users must designate a Windows
workstation to be the key server.