Specifications

Creating Your First Label Chapter 5-21
 To add a serial number (link to the serial file):
1 On the Draw menu, click Bar Code.
The Bar Code properties tabs appear.
2 Select these bar code properties:
Bar Code Type: Interleaved 2 of 5
Rotation: Normal
Multiplier: 2 (10 mils)
Bar-width Ratio: 2:1
Height: 0.50
3 In the Data Source box, click Serial file.
4 In the Serial file box, click stockno.srl.
5 Click the Human Readable tab and click No for the
Human Readable setting.
6 Click the Options tab and set the following properties:
Increment: 1
Copies: 1
Reset after each record: No
Field Name: StockNo
7 Leave the other Options tab settings at their defaults.
8 Click OK, and place the field in the lower right part of the
label.
9 On the File menu, click Save to save your changes.
Adding Linked
Fields
You can use the Linked data source to combine text and fields
(or to combine two fields) into one field on the label.
 To combine text with a dBase field:
1 On the Draw menu, click Text.
The Text properties tabs appear.
Note
You can use the Linked data source for text, bar codes, 2D bar
codes, and pictures.