Specifications

Chapter 3-14 Quick Start Guide
3 Click OK and then click on the label in the position where
you want to place the object.
Adding a Box 1 Do one of the following:
•On the Draw menu, click Box.
•Click Add Box on the Drawtools Bar.
The Box properties appear.
Figure 3-9 Box Properties
2 Specify the thickness and color of the horizontal and verti-
cal sides of the box. If you have a single-color printer,
however, the box will print only in that color.
3 Click OK and then click on the label in the position where
you want to place the box (the cursor position will be the
upper left corner of the box).
4 The box will appear with a default size. If you want to
change the size of the box, click and drag one of the box's
handles until you have reached the desired size.
Adding a Line 1 Do one of the following:
•On the Draw menu, click Line.
•Click Add Line on the Drawtools Bar.
2 Click and drag the cursor (appearing as a crosshair in the
design window) to draw a vertical or horizontal line.
3 To specify the thickness or color of the line, right-click on
the line and select Edit.