Specifications

Getting Started Chapter 2-9
Selecting a
Printer
1 On the File menu, click Select Printer.
2 Click the Printer drop-down arrow to display a list of
installed printers.
If you previously installed a thermal/thermal transfer
printer driver for use with this label design program, your
printer should appear in the list of installed printers.
3 Select the appropriate printer and click OK.
Note
If your label was designed for a different printer, a message
will appear asking if you want to modify the label. Click Yes to
convert the label to work with the currently selected printer.
The changes made for the conversion will not be permanent
until you save the label. You may need to do some fine-tuning
if the label conversion is not exact, so be sure to print a test
label before you commit to a large print run.
Removing a
Printer
1 On the File menu, click Select Printer, and then click
Install.
2 In the Installed Printers list, click on the printer you
want to remove.
3 Click Yes to confirm that you want to remove the selected
printer, and then click Remove.
4 Click Close and then click OK to return to the design win-
dow.