Specifications

Chapter 2-6 Quick Start Guide
Status Bar The Status Bar is located at the bottom of the design screen.
The left side of the Status Bar serves as a message area that
gives instructions and information as to what you are expected
to do next. Other informational status indicators displayed
from left to right include the name of the selected printer, the
communication port to which it is connected, and the
coordinates of the current cursor position.
Figure 2-1 The Status Bar
Rulers Two Rulers (at the left and top of design area) help you to
position fields on the label. Rulers appear in the currently
selected units of measure (inches or millimeters).
Rotation Button The Rotation Button is located in the top-left corner of
the design area, where the two rulers meet. When designing a
label that prints sideways, the Rotation Button allows you to
rotate the view of the label so you can more easily design the
label in a normal view. You can rotate the view 0, 90, 180, or
270 degrees relative to the print orientation. This affects only
the display of the label, not printing.
Design Area
Display Settings
The Display tab enables you to change program settings to
customize your label design environment. Settings included on
this tab include language selection, units of measure, display
of the grid, ruler colors, etc.
 To change the display settings:
1 On the Options menu, click Configuration, and then
click the Display tab.
2 Configure the display settings as appropriate for your label
design application.