Instruction Manual


Functions operation and indicator light
（Note: 1.Please make sure the device built-in memory card.
2.Make sure the device has power. We suggest to charge for 3 hours after you received.）
 Power-on: Standby mode(3 blue lights solid)
Long-Press the power button , enter into standby mode(3 blue lights solid).( If
memory card is defective, not been read successfully, or out of battery: Blue light flashes for 3 times
and the machine will shut down automatically after 1 minute without using any function)
 Photo:
In standby mode: Short-press the photo button
once and the blue light flashes
once to take one photo and save it automatically.

Video:
In standby mode: Short-press the video button
once and the 3 blue lights keep
flashing. Press the video button once again to stop recording. (The recordings will
be automatically in sections each 5 minute. When the memory is full, the old footage
will be overwritten by new footage, loop recording)

Night vision:
In standby mode: Short-press the power button again, and the blue lights turn
on
yellow lights
 Motion detection:
In standby mode: Press the video button
for 3s,and the lights turn on green.
When detect movement, the green lights flashing slowly and continues recording 1
minuter. Press the video button once to exit motion detection mode.

Reset:
In standby mode: When the machine crashes, no button work or the machine can not
be used normally, please press the photo button
and the power button at
the same time to reset the machine.All lights off.

Power-off:
In standby mode: Long-press the power button for 3s. The blue light flashes 3s
to shut down machine.