Exploded Parts

LAVATORY DRAIN

INSTALLATION INSTRUCTIONS

MODEL No: 330, 3301, 3302, 3303

Installation instructions:

1. Remove FLANGE, WHITE WASHER, and discard drain CAP from drain assembly. PlaceWHITE WASHER into FLANGE. Then,

place FLANGE through the sink hole (Clear silicone may be used in place of WHITE WASHER).

2. From underside of sink install CONE WASHER, STEEL WASHER, and thread LOCK NUT firmly.

3. Thread TAILPIPE to FLANGE assembly.

4. Tailpipe to be recieved by existing P-Trap.

(949) 417-5207

Santa Ana, Ca. 92705 3/16/2017

www.brasstech.com

Flange

Actuator

Gasket

Drain Cap

Cap Cover

White Washer

Cone Washer

Steel Wahser

Lock Nut

O-ring

Tailpipe

BRS-330

EN-3152 REV -

Recommended Installation by a Professional Plumbing Contractor

Note: The use of petroleum base plumbers putty on product will nullify warranty. We recommend the

use of clear silicone sealing material.

PAGE 1
LAVATORY DRAIN INSTALLATION INSTRUCTIONS MODEL No: 330, 3301, 3302, 3303 Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on product will nullify warranty. We recommend the use of clear silicone sealing material. Installation instructions: 1. Remove FLANGE, WHITE WASHER, and discard drain CAP from drain assembly. PlaceWHITE WASHER into FLANGE. Then, place FLANGE through the sink hole (Clear silicone may be used in place of WHITE WASHER). 2.