Specification

ManualsBrandsBrassCraft ManualsPlumbingProCoat 3/4 in. FIP x 3/4 in. PEX Barb x 18 in. Coated Stainless Steel Water Heater Connector (3/4 in. I.D.)

Job Name Engineer / Architect

Job Location Wholesaler

Submittal Date Contractor

This specification and all information contained herein is the confidential and exclusive property of

BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft

Mfg. This specification must be returned to BrassCraft Mfg if requested.

300.42 SWB07 Coated Stainless Steel Water Heater Connectors REV 10/12 2012 BrassCraft Mfg.

Product Submittal Form

SWB07 3/4” ID Coated Stainless Steel Water Heater Connector –

Female Iron Pipe x PEX

Use: For use in exposed locations only to connect water heaters, water softeners and other

water connected devices to the water supply

Design Features:

 Proprietary ProCoat® clear coat provides unrivaled corrosion protection

from harsh chemicals that can cause surface deterioration and pinhole leaks

 Superior corrosion resistance to harsh chemicals found in common

household cleaning, plumbing repair, and masonry products

 UV rays & salt resistant, ProCoat® connectors are certified for indoor &

outdoor use

 Uniform coat over entire length of connector for complete corrosion

resistance of the stainless steel core

 Integrated dielectric sleeve effectively isolates dissimilar metals within

the waterway to help prevent galvanic and electrolytic corrosion

 No dielectric union needed with installation. Dielectric is built into the

design of the connector

 Less torque to seal against the pliable rubber washer, especially on rough

nipple surfaces

 Longer connector nuts allow a greater number of thread-to-thread

contacts and a better seal

 100% Leak tested prior to coating application to ensure connector

performance and reliability

 100% Compliant

Operating Specifications:

Temperature: 40° to 180° F

Water Pressure: 125 PSI maximum

Part Listing:

SWB07-18N 3/4” ID X 18” connector with 3/4” FIP x 3/4” PEX barb (brass, pre-torqued)

For Residential and Commercial Applications

MATERIAL SPECIFICATIONS

Tubing

Stainless steel

Dielectric Sleeve

Polymer blend

Nuts

Brass, nickel plated

Washers

Rubber

PEX Fitting

Compliant brass

Coating

Polymer blend

Summary of content (2 pages)

PAGE 1
Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor SWB07 3/4” ID Coated Stainless Steel Water Heater Connector – Female Iron Pipe x PEX Use: For use in exposed locations only to connect water heaters, water softeners and other water connected devices to the water supply Design Features:  Proprietary ProCoat® clear coat provides unrivaled corrosion protection from harsh chemicals that can cause surface deterioration and pinhole leaks        Superior corrosion res
PAGE 2
A B PART DIMENSIONS ( Inches ) Connector Length Model Dim. A Dim. B 18.92/ 19.72 SWB07 18.00/18.80 Listings & Certifications:  CSA listed to ASME A112.18.6 and CSA B125.6  IAPMO listed to ASME A112.18.6 and CSA B125.