Product Overview

This specification and all information contained herein is the confidential and exclusive property of
BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft.
This specification must be returned to BrassCraft if requested.
400.212 P1-DL/ P3-DL PEX Toilet Riser w/Compr Sleeve or Insert REV 12/09 2009 Brass-Craft Mfg.
Product Submittal Form
P1-**DL/ P3-**DL PEX Toilet Riser - One-Piece with Compression
Sleeve or Insert
Use: For use in potable water distribution systems in accessible locations only
Design Features:
 One-piece construction
 Cut-to-Length for a clean, professional installation
 100% Compliant to California and Vermont “low-lead” requirements
Operating Specifications:
Temperature: 40°- 180°F
Pressure: 125 psi maximum
Tubing Diameter: 0.375” O.D. or 0.50" O.D.
MATERIAL SPECIFICATIONS
Tube
Cross-linked Polyethylene (PEX)
Compression Sleeve (3/8”OD)
POM
Compression Insert (1/2”OD)
Stainless steel
Part Listing:
P1-12DL 3/8” OD Tube x 11-1/2” Length
P1-12DL F 3/8” OD Tube x 11-1/2” Length, flag label
P1-15DL 3/8” OD Tube x 14-1/2” Length
P1-20DL 3/8” OD Tube x 19-1/2” Length
P1-20DL F 3/8” OD Tube x 19-1/2” Length, flag label
P3-15DL 1/2” OD Tube x 14-1/2” Length
P3-20DL 1/2” OD Tube x 19-1/2” Length
P3-20DL F 1/2” OD Tube x 19-1/2” Length, flag label
Listings & Certifications:
 IAPMO listed to ASME A112.18.1 - 2005/CSA B125.1-05 (File # 0645)
 CSA approved to California Health & Safety Code and Vermont Bill S.152 (Project # 2174785)
 MerFlex PEX listed by NSF to ASME A112.18.6, CSA B125, CSA B137.5 and U.P. Code
For Residential and Commercial Applications
PART DIMENSIONS (Inches)
PART DIMENSIONS (Inches)
Model
DIM. A
DIA. B
Model
DIM. A
DIA. B
P1-12DL
11.56
.38
P3-15DL
14.56
.50
P1-15DL
14.56
.38
P3-20DL
19.56
.50
P1-20DL
19.56
.38
A
B
JobName

Engineer/Architect

JobLocation

Wholesaler

SubmittalDate

Contractor
