Brochure

54
SPECIFICATIONS
TECHNICAL DATA SHEETS
Use: For use only in exposed locations to connect water heaters and other water connected devices to the water supply.
Not intended for use with recirculating water systems that produce continuous use temperatures above 115° F. For
those applications use the BrassCraft
®
CopperFlex™ or ProCoat
®
series connectors.
Design Features:
 Superior corrosion resistance to harsh chemicals found in common household cleaning
and plumbing repair products
 Greater strength & exibility. The patented polymer braid exhibits superior elasticity,
signicantly increasing the exibility of the connector
 No kinking, no crimping. The polymer braided jacket is specially engineered to bend
freely without kinking or crimping the connector
 Won’t work harden even with repeated bending
 No dielectric union needed with installation as the braiding and rubber are constructed
of non-conductive materials*
 Longer connector nuts allow a greater number of thread-to-thread contact and a better
seal
 No Lead
Operating Specications:
Temperature: 40° - 140° F, intermittent to 180° F
Pressure: 125 PSI maximum
OPERATING SPECIFICATION
12” 15” 18” 24”
Flow Coefcient (Cv) 5.9 5.8 5.6 5.4
ΔP (Pressure Drop) = GPM
2
/ Cv
2
for Example: 24” length connector @ 10 GPM
ΔP = 10
2
/5.4
2
= 100/29.16 = 3.43 psi
MATERIAL SPECIFICATIONS
Inner Hose
Rubber
Braiding
Coated polyester yarn
Barb
Brass
Ferrule
Brass
Nut
Brass
End Fitting
Brass
Washer
Rubber
Listings & Certications:
 IAPMO listed to ASME A112.18.6 / CSA B125.6 (File # 0452)
 CSA listed to ASME A112.18.6 / CSA B125.6 (File # 204593)
 No-lead product CSA listed to NSF 372 (Class 6853-01)
*Check with your local inspection ofce for applicable code requirements
SPEEDI PLUMB
®
PLUS POLYMER BRAIDED WATER HEATER CONNECTORS