Brochure

51
www.brasscraft.com
SPECIFICATIONS
TECHNICAL DATA SHEETS
Use: For use with natural, manufactured, mixed, liqueed petroleum (LP) gas, and LP gas-air mixtures.
The National Fuel Gas Code requires a gas shut-off valve installed upstream, within “easy reach” or 6 feet of the gas
appliance
Design Features:
 Heavy duty forged brass body helps reduce pinhole leaks commonly
associated with cast products
 Blow-out resistant stem is assembled from the inside with double o-rings
for reliable performance
 Right-sized handle helps ensure easy on/off operation even in tight
installations
 Quarter turn operation for easy on/off ow control
 PTFE seat for longer life and consistent performance
 Approved for indoor/outdoor use
 100% leak tested
Operating Specications:
Temperature: -40
° - 125° F*
Pressure: 5 PSI maximum
* TBV6F-8, TBV10-12, and TBVA10-12 are rated for 32
°-125° F
MATERIAL SPECIFICATIONS
Valve Body
Forged brass
Retainer
Forged brass
Ball
Brass, chrome plated
Seat
PTFE
Stem
Brass
O-ring
High-temperature rubber
Handle
Aluminum, coated
Screw
Steel, zinc plated
Listings and Certications:
 CSA listed to ANSI Z21.15 / CSA 9.1, ANSI / ASME B16.44 and CGA CR91-002
GAS BALL VALVES