Specification

This specification and all information contained herein is the confidential and exclusive property of
Brasscraft Manufacturing Co., and shall not be disclosed to others without the written consent of
Brasscraft Mfg. Co. This specification must be returned to Brasscraft Mfg. Co. if requested.
400.335 B1/B2/B3 SPP Braided Faucet Connector - Compression Inlet REV 07/19 ©2019 Brasscraft Manufacturing Company
Product Submittal Form
B1-**A/ B2-**A/ B3-**A Speedi Plumb® PLUS Braided Faucet
Connector - Compression Inlet
Part Listing (con’t):
B2-12A F 7/16” compression x 1/2” FIP* x 12” length
B2-20A F 7/16” compression x 1/2” FIP* x 20” length
B3-12A F 1/2” compression x 1/2” FIP* x 12” length
B3-16A F 1/2” compression x 1/2” FIP* x 16” length
B3-20A F 1/2” compression x 1/2” FIP* x 20” length
B3-30A F 1/2” compression x 1/2” FIP* x 30” length
* 1/2” FIP also fits 7/16” rubber slip nut
Listings & Certifications:
▪ IAPMO listed to ASME A112.18.6 / CSA B125.6
▪ IAPMO listed to NSF/ANSI 372 for Low-Lead Compliance
▪ IAPMO listed to NSF/ANSI/CAN 61
PART DIMENSIONS (Inches)
PART DIMENSIONS (Inches)
Model
DIM. A
DIM. B
Model
DIM. A
DIM. B
B1-12
12.0 / 13.0
1.02
B1-60
60.0 / 61.0
1.02
B1-16
16.0 / 17.0
1.02
B2-12
12.0 / 13.0
1.02
B1-20
20.0 / 21.0
1.02
B2-20
20.0 / 21.0
1.02
B1-24
24.0 / 25.0
1.02
B3-12
12.0 / 13.0
1.02
B1-30
30.0 / 31.0
1.02
B3-16
16.0 / 17.0
1.02
B1-36
36.0 / 37.0
1.02
B3-20
20.0 / 21.0
1.02
B1-48
48.0 / 49.0
1.02
B3-30
30.0 / 31.0
1.02
1/2 OD COMP
FITTING
1/2 FIP
FITTING
A
B