Specification

Job Name Engineer / Architect
Job Location Wholesaler
Submittal Date Contractor
This specification and all information contained herein is the confidential and exclusive property of
BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft
Mfg. This specification must be returned to BrassCraft Mfg. if requested.
400.104 B1/ B2/ B3 SPP Braided Toilet Connector - Compression Inlet REV 07/13 2013 BrassCraft Mfg.
Product Submittal Form
B1-**DL/ B2-**DL/ B3-**DL Speedi Plumb® PLUS Braided Toilet
Connectors - Compression Inlet
Use: For use in potable water distribution systems in accessible locations only.
Design Features:
 Engineered polymer braided fibers bend freely without kinking or
crimping
 Reinforced PVC inner hose ensures durability
 Rubber washers provide a large pliable sealing surface and ensure a
long lasting water-tight connection
 Long wing nuts allow for quick connection and ensure dependable
thread engagement
 8-sided pneumatic crimp provides greater dependability for reliable
nut-to-hose connections
 No Lead
Operating Specifications:
Temperature: 40°- 140°F, intermittent to 180°F
Pressure: 125 PSI maximum
Tubing Diameter: 0.300” ID (0.550” OD)
MATERIAL SPECIFICATIONS
Inner Hose
Reinforced PVC
Braiding
PVC coated polyester yarn
Barb
Brass
Ferrule
Zinc-plated steel
Nut
Polypropylene
Washer
Rubber
Compression Nut
Brass, chrome plated
FIP Adaptors
Brass, chrome plated
Part Listing:
B1-6DL F * 3/8” compression x 7/8” ballcock x 6” length
B1-9DL F ** 3/8” compression x 7/8” ballcock x 9” length
B1-12DL F 3/8” compression x 7/8” ballcock x 12” length
B1-12DLM F 3/8” compression x 7/8” ballcock (metal nut) x 12” length
B1-12DLU D Universal Connector - 3/8” compression x 7/8” ballcock x 12” length with 7/16” &
1/2” slip-joint & 1/2" FIP adaptors or 7/16” rubber slip nut
* No-Lead N/A
**No-Lead & DMA N/A
For Residential and Commercial Applications