Specifications

S83/85 Ultrasonic Generator Operation
A40-064 Rev 0 Page 36
4.8 Reset Function
The Reset function activates when a fault occurs, as indicated by a lit LED in the Status area. You
activate Reset when you fix the fault and want to return to standard operating mode.
Before pressing Reset, all alarms must be resolved, and all status LEDs must be off (except
REMOTE).
Press the RESET switch to turn the indicator off and allow the ultrasonics to be restarted.
Removing AC power will also reset the fault condition.
Figure 4-10 RESET Switch
LED lit
Press key