FullVUE™ Rear Camera Mirror for Jeep Wrangler JL (MY 2018-2020) FVMR-8876V2 Recommended Tools Difficulty Level Wrench Wire Strippers Wire Cutters Electrical Tape Screw Driver Panel Removal Tool Zip Ties Socket Set Install Time 1hr 30m - 2hr Product Features 3X Wider View Unobstructed HD View Eliminates Blind Spots Full Touch Screen Records as You Drive Seamless Integration Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE AR_06_23_20 Installation Inst
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Kit Contents Kit A Components for installing the FullVUE™ Mirror x1 FullVue™ Mirror Kit B x1 Power Harness x1 JL Mirror Stem Components for installing the Rear Camera x1 Video/Power Harness x1 Rear Camera Push Washers, Nylon Spacer, Zip Ties, Extended Camera Neck AR_06_23_20 Installation Instructions - FullVUE™ Mirror Page 2/12
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Installation of the FullVue™ Mirror Part 1 Assembling the FullVUE™ Mirror 1: Remove the FullVUE™ Mirror from the protective sleeve and locate the windshield mounting arm and screws. 2: Ensure that the mirror and mounting arm are oriented as illustrated, with the front facing camera on the right side of the mirror, and the mirror stem facing up.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Part 4 1: Attaching the FullVUE™ Mirror to the Jeep Wrangler JL Remove the mounting bolt on the FVMR bracket to free the arm from the JL mirror mount. 1. 2: Place the JL mirror mount through the factory trim piece and reassemble. 3: Mount the FullVUE™ Mirror to the JL headliner beam. Do not reattach the trim panel yet.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Part 6 Routing the FullVUE™ Mirror harness 1: Remove the glove box for ease of access 2: Feed the mirror end of the harness through the back of the head unit cavity into the glove box cavity 3: Route the harness across to the passenger kick panel.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Installation of the Rear Vision Camera Part 1 Attaching the Rear Vision Camera bracket 1: Loosen the lug nuts and carefully remove the spare tire. Take special care not to damage your factory reverse camera. 2: Slide the camera bracket on the top two studs. 3: Temporarily place the spare tire back on the studs to check and confirm proper camera placement with respect to the spokes of the rim.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Installation of the Rear Vision Camera Part 2 Routing camera harness into the vehicle 1: Run the camera harness through the top hole of the spare tire carrier. 2: Open the tailgate and remove the factory trim panel on the inside portion of the tailgate.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Installation of the Rear Vision Camera Part 3 Routing camera harness into the vehicle 1: Start by routing the harness towards the floor and under the carpet surrounding the wheel well trim panel on the passenger side. 2: Continue around the wheel well to the rear passenger side door sill. 3: Remove rear passenger side door sill using a trim removal tool.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 Installation of the Rear Vision Camera Install Review Installation of the Rear Vision Camera Double check power connections Check video to confirm camera orientation If needed, seal body work with silicone Shift into reverse to check reverse trigger Continue to FullVUE™ Mirror Features AR_06_23_20 Installation Instructions - FullVUE™ Mirror Page 9/12
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 FullVUE™ Mirror Settings FullVUE™ User Interface Guide 1. Touch screen once to bring up User Interface 2. Swipe finger left or right to switch camera views 3. Use +/- on left side of screen to adjust brightness 4.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 FullVUE™ Settings Video Recording Menu Instructions Normal Video Protect and Unprotect - This is where all general video recordings can be found. All files in this folder will be overwritten if SD card runs out of space. DVR will overwrite the oldest files first. - These functions will not protect the video from being overwritten.
Vehicle Application: Jeep Wrangler JL (MY 2018-2020) Part Number: FVMR-8876V2 FAQ Section 1. Can you flip the camera in the FullVUE Screen? At this time you cannot flip the image from the FullVUE™ camera. Please check back with our website for the latest information. 2. Can I turn the display off and use the FullVUE as a mirror? Yes! Simply tap the bottom button 1 time ( 2 times if you have the time stamp screen) and the mirror will function as a traditional mirror.
