Instructions

TECHNICAL NOTE
www.brand.de 5
Dispensette® drum extraction system
Titrette® extraction system for Bag-in-Box packaging system
When you want to dispense media directly from drums or canisters,
you are faced with two problems:
1. This uses up a lot of space on the worktable.
2. The Dispensette® is positioned quite high above the work table,
which oen makes it diicult to work ergonomically.
The Dispensette® drum extraction system provides a solution in this situation.
The Dispensette® can be attached to a laboratory rod or a metal stand, or fixed
directly to a wall or laboratory furniture with screws. These options secure the
Dispensette® in place and saves space. The media container can be placed in
a base cabinet or on the ground nearby. Media is transported via fluoropoly-
mer tubing. Changing containers is facilitated by a coupling element with ball
valve, which ensures that the medium cannot leak from the fluoropolymer
tubing.
In addition to bottles, ready-for-use titration media is oered in Bag-in-
Box packaging. The advantage of Bag-in-Box packaging is that the titration
solution is protected from light and the ambient atmosphere (i.e. its oxygen,
carbon dioxide, and humidity). The packaging ensures that the content of
the titration solution does not change and thus the analysis result is not
flawed. Standard Bag-in-Box packaging systems already come with tubing
and connectors or they are sold separately by titration media manufacturers.
M6 thread connections are a common format used to connect to the adapter
of the Titrette® extraction system. The Titrette® and the adapter are then
fastened to a laboratory rod or metal stand via a fixture.
Titrette® extraction system for Bag-in-Box
packaging system
(Titripac® is a registered trademark of Merck
KGaA, Darmstadt, Germany)
Dispensette® S connected with a barrel
to a pipeline