Specifications

55
MAINTENANCE SCHEDULE FOR THE ARIEL ATOM 2
SCHEDULE II: BEFORE EVERY TRACK EVENT
Component Service/Operation
 Engine Oil
Check before every track event. Change as necessary.
 Engine Oil Filter
Replace during every oil change.
 Engine Coolant
Check before every track event.
 Supercharger
Aftercooler Coolant
Check before every track event.
 Air Filter
Check before every track event.
 Spark Plugs
Inspect before every track event and change if necessary.
 Transmission Fluid
Inspect for leaks before every track event.
 Brake Fluid
Inspect levels, condition, and any leakage before every track event.
 Brake Rotors
Refer to the Brake Bedding Procedures on page12. Inspect and replace when thickness decreases
to 19mm, when pulsation is noted, or if cracking or other physical damage is found during inspection.
 Brake Pads
Inspect for pad damage, thickness issues or deterioration. Replace brake pads when brake rotors
are replaced. Refer to the brake bedding procedures on page12.
 Brake Hoses &
Lines
Inspect brake lines for rubbing, scraping, or any damage.
 Fuel Lines &
Connections
Inspect lines for rubbing or scraping before every track event.
 Exhaust System
Visually inspect exhaust flange bolts for tightness and/or damage.
 Tires
Inspect tires for proper pressure and tread wear before and after every track event.
 Wheels
Ensure lug nut torque is 80 ft-lbs.
 Drive Belt
Check for abnormal wear.
 Rod Ends
Inspect rods ends on Push Rods, Steering Rods, and A-Arms for any signs of fatiguing or wear,
replace if parts appear worn. Verify that all check nuts are tight on all rod ends.