Specifications

45
AIR FILTER REMOVAL & INSTALLATION
For vehicles with Honda engines, or GM engines with corrugated intakes, follow these directions:
To service the K&N air filter, the rear airbox cover must be removed. Remove the four 1/4 turn fasteners
holding the airbox cover to the engine cover and remove the body panel. Remove the three fasteners securing
the intake snorkel assembly, and you will find the air filter under it. The intake snorkel should rotate forward
within the roll bar to allow you access to the filter. Reverse this procedure to reinstall the air filter noting that the
K&N only fits in the snorkel one way.