Specifications

43
TRANSMISSION OIL
GM Engines
The transaxle fill/level indicator plug for the GM engine is on the left side of the car, just behind the axle. Due to
the angle of the engine/transaxle assembly, the proper fluid level of the transaxle is about 1 in. (25.4 mm)
below the level indicator plug. The drain fitting is identical to the fill plug and is located below the left axle. Both
plugs require the use of an 8mm hex wrench to remove or install.
Honda Engines
The transaxle fill/level indicator plug for the Honda engine is on the left side of the car, just behind the axle.
Due to the angle of the engine/transaxle assembly, the proper fluid level of the transaxle is approximately
1 in. (25.4 mm) below the level indicator plug
. The drain plug is located below the left axle. Use a 17mm
wrench to remove the fill plug, and use a 3/8 in. square drive to remove the drain plug.