Installation Guide

9
732 South Racetrack Road, Henderson, Nevada 89015
i n f o @ v i n o t e m p . c o m
OPERATING YOUR APPLIANCE
CONTROLS
ON/OFF Power
To turn the appliance off, touch and hold the POWER key for 5 seconds until the temperature display goes
off. To turn the appliance on, touch and hold the POWER key for 1 second until the temperature display
lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will be on
when a multi-key function is selected. To perform a multi-key function, touch and hold the first key, then
touch the second key for at least 5 seconds and then release both keys.
Setting the Temperature
• The unit has two separate temperature compartments. You can set the temperature of the bottom
compartment (freezer) by touching the left UP and DOWN symbols and set the temperature of the top
compartment (refrigerator) by touching the right UP and DOWN symbols. When you touch either key for
the first time, the LED readout will show the original temperature set previously. (The temperature preset
at the factory is 0°F/-18°C for freezer compartment and 39°F/4°C for refrigerator compartment.)
• The temperature you are setting will increase by one degree each time you touch the UP symbol, and will
decrease by one degree each time you touch the DOWN symbol.
• The range of the temperature control is from -11°F/-24°C to 11°F/-12°C for freezer compartment and from
36°F/2°C to 43°F/6°C for refrigerator compartment.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.