User manual

BrainMaster 2.5 Software User Manual
531-346 v1.0 2/10/2012 Page 13 of 82
REF
Data Channels Menu
1. EEG Channels Section – Section where you choose the EEG Channels for feedback.
2. Software Digital Filter Order Sections – Section where you set the Digital Filter order. The
higher the filter order, the more selective the system is.
3. Sum-Channel Mode Section – Section where you set the Sum-Channel mode on or off.
4. Amplitude Scale Section – Section where you can set the Amplitude scale to either Peak-to-
Peak or RMS.
5. Save EEG to Disk Section – Section where you can turn on or off the EEG saving option.
6. Artifact Threshold Section – Section where you can adjust the artifact rejection range.
7. Software Notch Filters Section – Section where you can turn on or off the Software notch
filters.
8. EEG Data Sampling Rate Section – Section where you can adjust the Sample rate you are
collecting from the data.
9. COM Port Select Section – Section where you can set what COM Port your BrainMaster is
on. ***PLEASE NOTE: COM 1 – 8 can also be chosen under the Data Tab of the
Training/Control Screen.
10.Search this PC Button – Click to let the BrainMaster Software search for the BrainMaster
unit.
11.Electrode & Trainee Info Button – Click to enter the Electrode & Trainee Info Menu.
12.OK Buttton – Click to confirm changes and exit the Data Channels Menu.
13.Cancel Button – Click to cancel changes and exit the Data Channels Menu.