Product manual

PX Range Product Manual Version 2.3 © Copyright Brainboxes Limited 2013 Page 21 of 45
• If the COM Port number is labelled “in use”, it is either currently used by a COM Port present on the
system, or is reserved for a device which is not currently present. It is possible to select this COM
number and force the change, if you are sure it is not required by any other device.
2.7. Port Settings
The Port Settings allow you to set Default or Override Settings for the serial communication and how to deal
with incoming hardware handshaking events.
• To open ‘Port Settings’, open device manager and double click on the Brainboxes COM Port Entry
under the ‘Ports’ section
• Then Click on the ‘Port Settings’ tab.