Datasheet

BARRCODE SCAN ACCESSORIES
BARCODE SCAN EQUIPMENT - CHAMP
169169
STANDARD FOR BARCODE SCANNERS
This is the ideal standard for your barcode scanner. You can place your scanner in this standard for a cleaned up
workingspace. While the scanner stands in its standard, you can use it by adjusting the fl exible neck to the appli-
cation. This standard can be placed loose or it can be assembled to a wall.
Suitable for barcode scanners: BS 3035, BS 3040, BS 3110 en BS 3120.
Technical specifi cations
Size standard : 135x103 mm
Length neck : 200 mm
Mounting : Desktop/Wand
Suitable for : BS3035,BS3040,BS3110,BS3120
Type no. Supplier no. Type
BS3530
784ST1W Standard Flexible Neck
HAND SCANNERS
CCD CONTACTSCANNER
A CCD scanner has the advantage that there are no moving parts inside. This means the scanner is better pro-
tected against a rough handling. The CCD scanner therefore has a 2 year warranty. The contactscanner means
you have to scan the barcode from a relatively short distance. If this is not possible, we advise the 'long range'
scanner.
Flexible
Because all fi rmware of this scanner is fully prepared to every kind of interface, you can connect the scanner
through your keyboard interface, serial port or USB port. The only thing you need is the correct connection ca-
ble. The cables are exchangeable due to the snap-in 'Champtek' cable system. The 'Champtek' scanners include
an USB or PS/2 keyboard interface cable.
Technical specifi cations
Cable length : 1.50 m
Scan range : 50 mm
Scan width : 80 mm
Power use : 75 mA
Light source : Red LED 632 nm
Reading indicator : Beeper and LED
Scan speed : 100 scans per second
Warranty : 2 year
• No moving parts inside.
• Prepared for every kind of interface.
• Unique champ 'snap in cable system'.
Type no. Supplier no. Connection method
BS3010
SD313E-07 PS/2
BS3015
SD313E-08 USB