Datasheet

PCI
160
MULTI I/O PCI CARD
This card provides 2 independent high-speed serial ports and a IEEE1284 parallel port on a seperate bracket for
virtually any system with a PCI or PCI-X slot. It is designed for serial devices without power supply. Power can
be supplied through the ninth pin on the serial connectors.
Technical specifi cations
Interface : PCI (3.3 V & 5 V)
Internal connectors : 1x 2x13-pin header
Bracket format : Full height
OS support
: DOS, Linux (2.4 / 2.6), Windows 98SE / ME / NT4.0 / 2000 /
XP (32 & 64 bit) / 2003 / Vista 7 (32 & 64 bit)
Type no. Supplier no. External RS-232 connectors
PCI42
MIO5079A 2x DB9 (male)
RS-422/RS485 PCI CARD
This card is compatible with all big industrial applications. Thanks to the “Auto Detect and Switching RS-
422/485” technology, the card automatically detects the data protocol and how transmit- and receive connec-
tions are realised. This way, no jumper settings have to be done.
Technical specifi cations
Interface : PCI (3.3V & 5V)
Bracket format : Full-height
External connectors : 1x D-sub 44-pin female > 2x D-sub 9-pin male
OS support : DOS, Linux (2.4 / 2.6), Windows 2000 / XP (32 &6 4 bit) / 2003 / Vista (32 & 64 bit).
• Automatic direction control of ON or OFF signals in 2-wire RS-485 mode thanks to the SUNIX AHDC/CS? technology.
• Built-in 64-byte hardware FIFO & 128K byte DMA software FIFO for high speed+reliability
• Embedded 15 KV ESD protection.
Type no. Supplier no. Number of ports
PCI72
IPC-P2002 2
LOW PROFILE PCI NETWORK INTERFACE CARD
This Low-profi le network card enables you to provide network access to small bare-bone systems with 10/100
Mbps network access. Suitable for installation companies and system builders.
Technical specifi cations
Interface : PCI (5 V)
Internal connectors : None
External connectors : 1x RJ-45
Bracket format : Low profi le
OS support : Linux(2.4.x/2.6.x),Windows 98/ME/2000/XP/NT/Vista 7, Netware 3.x/4.x
Chipset : Realtek RTL8100C chipset
Type no. Supplier no. Speed
PCI180
PCI-LAN-LP 10 / 100 Base T
INTERNAL SATA PCI CARD
Upgrade a system with 4 SATA channels and raid functionality using this card. Increase data transfer speed with
a raid 0 setup, fault-tolerance with a raid 1 setup or combine both in a raid 0+1 or 1+0 setup.
Technical specifi cations
Interface : PCI (3.3 V & 5V)
Internal connectors : 4x SATA female
Bracket format : Full height
OS support
: Linux (2.4 / 2.6), Windows 98SE / ME / 2000 / XP (32 & 64 bit) /
2003 / Vista 7 (32 & 64 bit)
Type no. Supplier no. External connectors
PCI74
SATA4000 none
INTERNAL COMPONENTS - SUNIX