Datasheet

SIGNAL CONVERSION
107
EMINENT USB TO SERIAL CONVERTER
Connect the EM1016 to your desktop or notebook easily, thanks to the USB interface. The serial converter is
compatible with USB 1.1 as well as USB 2.0. The standard RS-232 port enables you to connect your serial device
like a PDA (personal organiser), digital camera or other serial application
Technical specifi cations
USB standard : USB 2.0
Supports : RS-232 serial interface
Cable length : 60 cm
Type : USB to serial converter
• Easily connect a serial devices to your computer
• Compliant with USB 2.0 specifi cation
• Supports RS232 serial interface
Type no. Interface
EM1016
USB
USB TO PARALLEL CONVERTER
The EM1018 high performance converter offers you the best compatibility.
You have parallel devices, such as a printer, but they cannot be connected to your computer. Then the Eminent
USB to Parallel Converter is what you need! This USB to parallel adapter lets you connect a parallel device to
your USB port, even with Bi-directional operation.
Technical specifi cations
Type : USB to parallel converter
Cable length : 1.8 m
USB standard : USB 1.1
Supports : IEEE1284 parallel interface
• USB to parallel converter high performance
• Compliant with USB 1.1 specifi cation
• Supports IEEE1284 parallel interface
• Supports bi-directional operation
Type no. Interface
EM1018
USB
RS-232 - RS 422 - RS-485 CONVERTER
This converter may be used as bi-directional interface converter to link RS-232 to a RS 422/RS-485 system or
vice versa, or as Line Driver to extend the transmission distance. It is also possible to connect multiple serial ports
to set up a low cost asynchrone small network.
Technical specifi cations
Switch : DTE/DCE
Conversion : Bi-directional
Transmission : A-synchrone
Power Supply : Adapter 12V/500 mA or 9 pin RS-232 (optional)
Mode : Full/half duplex
Data rate : 100 Kbps
Control : TD/RD
• Possibility to connect multiple serial ports.
Type no. Maximum range
AB6290
1300m
SIGNAL DISTRIBUTION