Datasheet

SIGNAL CONVERSION
106
RS-232 - RS 422 - RS-485 CONVERTER (MALE VERSION)
This converter may be used as bi-directional interface converter to link RS-232 to a RS 422/RS-485 system or
vice versa, or as Line Driver to extend the transmission distance. It is also possible to connect multiple serial ports
to set up a low cost asynchrone small network.
Technical specifi cations
Maximum range : 1300 m
Switch : DTE/DCE
Conversion : Bi-directional
Transmission : A-synchroon
Power supply : Adapter 12V/500 mA or 9 pin RS-232 (optional)
Mode : Full/half duplex
Data rate : 100 kbps
Control : TD/RD
Type no. Type
AB6291
RS-232-RS-422/485 converter male
USB TO PARALLEL CONVERTER
Often the parallel port on a system is not present. This can be a problem when the user needs to connect a
printer with a parallel port. This cable solves that problem and realises a parallel port by using a USB port.
Technical specifi cations
Input interface : USB A (male)
Type : Sunix USB to parallel converter
Output interface : D-Sub 25-pins (female)
Type no. Supplier no. Input interface
SB2050
UTP1025B USB A (male)
USB TO 4X RS-232 CONVERTER
Create four serial ports for your system by connecting this converter to your USB port. The converter has dual
databuffers for both up- and downstream. The product is normally USB powered and has no need for a power
adapter.
Technical specifi cations
Streaming : Up- and downstream
Type no. Supplier no. Number of input ports
SB2010
UTS4009P4 4x DB9 male
KTI INDUSTRIAL RS-232 TO RS422/485 CONVERTER
This converter is designed to convert RS-232 signals to optic isolated and balanced full or half duplex RS-422 or
RS-485 signals with a max. baud rate up to 115.2 Kbps. Remote RTS control support enables the software to
have control over the tranmission of RS-485 data. Because of the possibility to mount the converter to a DIN-
rail, it is perfect for industrial applications.
Technical specifi cations
Model : DIN-rail
Power supply : External
Designed for : RS232 signals to optical isolated and balanced full or half duplex RS-422 or RS-485 signals
• Ideal for industrial applications.
Type no. Supplier no. Input interface
KC1102
KSC-240 D-Sub 9-pin (female)
SIGNAL DISTRIBUTION