Technical information

Opto Hardware Reference
Figure 5-9. Watchdog Output Select. 60
Figure 5-10. Opto OUT24 Memory Map. 61
Figure 5-11. Opto OUT24 J2 Pin Outs. 62
Figure 5-12. Opto OUT24 J2 Female 50D Pinout. 63
Chapter 6. Opto IN24 Configuration.________________________________
Introduction. 64
Configuring The Opto IN24 Card. 64
Setting The Opto IN24 I/O Address. 64
Using More Than One Opto IN24 Card. 69
Volt Free Contact Whetting Voltage. 70
Using Volt Free Contacts. 70
Interrupt Selection. 71
Watch Dog Selection. 71
Opto IN24 Memory Map. 73
Opto IN24 Input Specification. 74
Opto IN24 Pinouts. 75
Chapter 6. List Of Figures.________________________
Figure 6-1. PC Opto IN24 Card Layout. 65
Figure 6-2. Opto IN24 Factory Set DIP Switches. 65
Figure 6-3. Likely I/O Address. 65
Figure 6-4. I/O Addresses To Avoid. 66
Figure 6-5. Opto IN24 Base Addresses. 66
Figure 6-6. Expower Jumpers. 70
Figure 6-7. Whetting Volt Free Contacts. 70
Figure 6-8. The IRQ Jumper Block. 72
Figure 6-9. Watchdog Output Select. 73
Figure 6-10. Opto In24 Memory Map. 74
Figure 6-11. Opto IN24 J2 Pin Outs. 75
Figure 6-12. Opto IN24 J2 Female 50D Pinout. 76
Intro-11