Technical information

Opto Hardware Reference
Figure 4-2. Opto OUT48 Factory Set DIP Switches. 38
Figure 4-4. I/O Addresses To Avoid. 39
Figure 4-4. Likely I/O Address. 39
Figure 4-5. Opto OUT48 Base Addresses. 39
Figure 4-6. Driver Chip Select. 42
Figure 4-7. The IRQ Jumper Block. 44
Figure 4-8. Watchdog Output Select. 45
Figure 4-9. Watchdog Output Select. 46
Figure 4-10. Opto OUT48 Memory Map. 47
Figure 4-11. Opto OUT48 J2 Pin Outs. 48
Figure 4-12. Opto OUT48 J2 Female 50D Pinout. 49
Chapter 5. Opto OUT24 Configuration.__________________________________
Introduction. 50
Configuring The Opto OUT24 Card. 50
Setting The Opto OUT24 I/O Address. 50
Using More Than One Opto OUT24 Card. 56
UDN2984 ULN2804 Driver Selection. 56
Source Driver Output Connection. 56
Sink Driver Output Connection. 57
Interrupt Selection. 57
Watch Dog Selection. 59
Opto OUT24 Memory Map. 60
Opto OUT24 Output Specification. 61
Opto OUT24 Pinouts. 61
Chapter 5. List Of Figures.________________________
Figure 5-1. Opto OUT24 Card Layout. 51
Figure 5-2. Opto Out24 Factory Set DIP Switches. 51
Figure 5-4. I/O Addresses To Avoid. 52
Figure 5-4. Likely I/O Address. 52
Figure 5-5. Opto OUT24 Base Addresses. 52
Figure 5-6. Driver Chip Select. 56
Figure 5-7. The IRQ Jumper Block. 58
Figure 5-8. Watchdog Output Select. 59
Intro-10